Jaylor’s Horizontal Quad, 4-auger TMR mixers are designed and built by cattlemen for cattlemen. Our years of experience with feedlot rations guarantees you the perfect mixer for your needs. Our Models H1650, H1850 and H1950 provide you with the right capacity and speed. All models are designed and built with the same rugged construction delivering extreme strength without excess weight. Our modern components provide finger touch control to assure power and performance that deliver feed accurately, and efficiently. With the best warranty and customer service in the industry, your choice of one of our mixers will long be rewarded.
H1650 Quad Auger Mixer | |
Capacity No Extension | 50ft³ | 1.42m³ |
Weight | 1300lbs | 590kg |
Height | 69in | 1.75m |
Width | 46in | 1.17m |
Length | 94in | 2.39m |
Number Of Knives | 13 |
Drum Material | Polyethylene |
Drum Thickness | 0.43in | 10.9mm |
Door Width | 18in | 45.7cm |
Door Height | 22in | 55.9cm |
Discharge Height | 13in | 33.0cm |
Frame | Galvanized Steel |
Standard Tires | 16X6.50-8 4PR (3) |
Standard Drive | 16 HP Vanguard Gas Engine |
Starting System | Electric 12VDC |
Capacity | 650ft3 | 18.4m3 |
Ration Capacity | 19500lbs | 8850kg |
Box Weight | 16000lbs | 7250kg |
Box Height | 76in | 193cm |
Box Length | 209in | 531cm |
Box Width | 94in | 239cm |
Overall Height On Typical Truck | 121in | 307cm |
Overall Length On Typical Truck | 299in | 760cm |
Overall Width On Typical Truck | 102in | 259cm |
Recommended Truck Engine | 260 HP |
Variable Auger Speed | 4-26 RPM |
Auger Drive System | Hydrostatic |
Number Of Optional Knives | 36 |
Top Auger Thickness | 1/2in | 12.7mm |
Lower Auger Thickness | 5/8in | 16mm |
Discharge Height On Typical Truck | 52in | 132cm |
Door Opening Width | 48in | 122cm |
Floor Thickness | 1/4in | 6mm |
Drum Wall Thickness | 1/4in | 6mm |
Rear Axle Requirement | 32000lbs | 14500kg |
Front Axle Requirement | 11000lbs | 5000kg |